How to Replace the Battery in a 2016 Ford Explorer Key Fob- A Step-by-Step Guide_1
How to Replace Battery in 2016 Ford Explorer Key Fob
Replacing the battery in your 2016 Ford Explorer key fob is a straightforward process that can be done at home with minimal tools. Whether your key fob is acting up or you simply need to refresh the battery, this guide will walk you through the steps to ensure a smooth replacement.
Before you begin, gather the following items:
- Replacement battery (CR2032)
- Screwdriver (if needed, depending on the model of your key fob)
- Soft cloth or tissue paper
Step 1: Remove the Back Cover
Locate the back cover of your key fob. It is usually held in place by a small screw or clip. Use your screwdriver to remove the screw or gently pry the cover open with your fingers. Set the cover aside on a soft surface to prevent scratching.
Step 2: Remove the Old Battery
With the back cover removed, you will see the battery compartment. Carefully lift the battery out of the compartment. If the battery is stuck, gently tap the compartment to release it.
Step 3: Insert the New Battery
Take the new CR2032 battery and insert it into the compartment with the positive (+) side facing up. Make sure the battery is properly seated before closing the compartment.
Step 4: Reassemble the Key Fob
Replace the back cover of the key fob. If your key fob has a screw, use your screwdriver to secure the cover. If it has a clip, make sure it is properly engaged.
Step 5: Test the Key Fob
Press the buttons on your key fob to ensure that it is functioning correctly. If the key fob is still not working, double-check that the battery is properly inserted and that the back cover is securely in place.
By following these simple steps, you can easily replace the battery in your 2016 Ford Explorer key fob. Remember to keep your key fob away from extreme temperatures and store it in a safe place to prevent damage to the battery and key fob itself.
