How to Effectively Update the Firmware of DJI Pocket 3- A Step-by-Step Guide

How to Update DJI Pocket 3 Firmware: A Step-by-Step Guide

DJI Pocket 3, the latest compact drone from DJI, is a marvel of modern technology. To ensure that you get the best performance and the latest features, it’s essential to keep the firmware updated. Updating the firmware can improve flight stability, add new features, and enhance the overall user experience. In this article, we will guide you through the process of how to update DJI Pocket 3 firmware, step by step.

Step 1: Check for Firmware Updates

Before you begin the update process, it’s crucial to check if there are any available firmware updates for your DJI Pocket 3. Follow these steps:

1. Power on your DJI Pocket 3 and connect it to your smartphone via the DJI Fly app.
2. Open the DJI Fly app and navigate to the “My DJI” section.
3. Look for the “Firmware Update” option and tap on it.
4. The app will automatically check for available updates. If there are any updates, you will see a list of devices that require an update.

Step 2: Download the Firmware Update

Once you have identified that there is an available firmware update for your DJI Pocket 3, follow these steps to download the update:

1. Select the DJI Pocket 3 from the list of devices that require an update.
2. Tap on the “Download” button next to the firmware version.
3. Wait for the firmware to download completely. The download time may vary depending on your internet connection.

Step 3: Connect Your DJI Pocket 3 to Your Computer

After downloading the firmware, you need to connect your DJI Pocket 3 to your computer. Follow these steps:

1. Power off your DJI Pocket 3.
2. Connect the USB-C cable that came with your drone to the DJI Pocket 3 and your computer.
3. Make sure your computer recognizes the DJI Pocket 3 as a USB device.

Step 4: Install the Firmware on Your DJI Pocket 3

Now that your DJI Pocket 3 is connected to your computer, it’s time to install the firmware:

1. Open the DJI Assistant 2 software on your computer.
2. The software will automatically detect your DJI Pocket 3 and prompt you to install the firmware.
3. Follow the on-screen instructions to install the firmware. Do not disconnect your DJI Pocket 3 from the computer during the installation process.

Step 5: Verify the Firmware Update

Once the firmware installation is complete, follow these steps to verify that the update was successful:

1. Disconnect your DJI Pocket 3 from the computer.
2. Power on your drone and connect it to your smartphone via the DJI Fly app.
3. Navigate to the “My DJI” section in the app and check the firmware version. It should now reflect the updated version.

Congratulations! You have successfully updated the firmware on your DJI Pocket 3. By keeping your drone’s firmware up to date, you ensure that you’re enjoying the best possible performance and features.